Kairox DIY Calc

Landscaping materials

Topsoil Calculator

Estimate the volume of topsoil to spread over a rectangular area. Enter the extra depth to be added rather than the total soil profile, then compare bulk cubic yards with bagged volumes from the product label.

Enter your measurements

ft
ft
in
ft3
%

Example estimate

Net volume (cu ft)
30
Net volume (cu yd)
1.1111
Order volume (cu yd, before supplier increment)
1.2222
Whole bags to order
17

Estimates only. Whole purchase counts round up; displayed measurements round to four decimal places. The allowance is an editable planning assumption.

How the calculation works

Volume(ft³) = length(ft) × width(ft) × added depth(in) ÷ 12. Order cubic yards = volume × (1 + allowance/100) ÷ 27. Bags = ceiling(order cubic feet ÷ bag volume).

Measure the area that will receive soil

Exclude paving, structures, and sections that will stay at their existing level. Divide an irregular lawn or bed into non-overlapping rectangles and record each separately. The calculator assumes a uniform added layer. If one end needs a deeper fill, estimate that section on its own instead of hiding a large change inside a single depth value for the whole site.

Distinguish a layer from a grading problem

Length times width times added depth gives a geometric fill volume. It does not assess drainage or tell you where a finished grade should be. Adding soil near a building, fence, tree, or existing path may affect more than the quantity required. Resolve the desired elevations and site constraints before using the calculator to turn those dimensions into an order.

Compare volume labels rather than bag weights

Bagged soil may be labeled by volume, weight, or both. This tool needs the volume per bag, so check the packaging carefully. A weight label alone is not enough to infer volume without a suitable density. The page deliberately does not supply a universal topsoil weight conversion, because composition and condition must be considered when a supplier quotes by the ton.

Choose an adjustment with a clear purpose

The allowance increases the order volume before bag rounding. It is an editable planning estimate, not a prediction of settlement or compaction. Ask the supplier how the product’s delivered condition relates to the intended finished layer. Keep any recommended adjustment separate from your measurement uncertainty so you do not repeatedly increase an order for the same reason under different names.

Check the product as well as the quantity

An adequate volume does not establish that a soil product suits your planting or site. Discuss the intended use, screening, blend, delivery access, and any testing needs with the supplier or an appropriate adviser. If comparing bulk and bags, include their actual stated volumes and order increments. The calculated cubic yards are unrounded geometry; the supplier may require a larger whole or fractional delivery quantity.

Worked example

The default inputs model a uniform layer over one rectangle. The calculator first shows net cubic feet and cubic yards, then adds the example allowance and counts whole bags. Changing the bag volume changes the packaged count without changing the measured space that needs filling.

Example inputs — Length: 12 ft; Width: 10 ft; Depth: 3 in; Volume per bag — check packaging: 2 ft3; Extra material allowance (planning estimate): 10 %.

Calculated example

Net volume (cu ft)
30
Net volume (cu yd)
1.1111
Order volume (cu yd, before supplier increment)
1.2222
Whole bags to order
17

Frequently asked questions

Does this predict settled depth?

No. It calculates the entered geometric layer and an allowance you choose. Settlement and compaction depend on the material and placement, so ask the supplier how to order for your finished target.

Can I use it for a raised bed?

Use the inside footprint and intended fill depth for a simple rectangular bed. Subtract displaced space separately if the bed contains objects or layers that will not be filled with this soil.

Why is there no default tonnage?

A universal topsoil density would give a misleading conversion. If the supplier sells by weight, ask for its volume-to-weight basis and confirm the delivered material and moisture condition.

Sources and scope