Kairox DIY Calc

Flooring and finishing

Paint Calculator

Estimate paint for the four walls of a rectangular room, subtracting measured openings and allowing for multiple coats. Ceiling paint, trim, primer, and other products should be planned separately rather than combined into one unexplained coverage figure.

Enter your measurements

ft
ft
ft
ft2
sq ft/US gal
%

Example estimate

Net wall area (sq ft)
312
Paint including allowance (US gal)
1.9611
Whole one-gallon cans to order
2

Estimates only. Whole purchase counts round up; displayed measurements round to four decimal places. The allowance is an editable planning assumption.

How the calculation works

Wall area = 2 × (room length + room width) × height − openings. Gallons = wall area × coats × (1 + allowance/100) ÷ coverage per gallon. One-gallon cans = ceiling(gallons).

Measure wall area from the room perimeter

The two room dimensions define the perimeter, which is multiplied by wall height. Enter the combined area of doors and windows you want to subtract. This assumes all four walls have the same height and are included in the job. If only selected walls are being painted or the room has sloping surfaces, measure those surfaces separately rather than trying to force them into this room model.

Use coverage for the paint you will buy

The coverage input is square feet per US gallon per coat. BEHR lists a range of 250–400 square feet per gallon for some products; the default 350 is an arithmetic planning assumption within that range. It is not a promise for your surface. Read the chosen product label and consider the application method and substrate before using a coverage value in a purchase estimate.

Coats multiply the painted area

A two-coat job needs two passes over the net area, so the model multiplies by the entered whole-number coat count. Do not reduce that count merely because a product name includes primer or advertises a particular hide claim. Check the product’s conditions and your project requirements. A separate primer may have a different coverage rate and should have its own quantity calculation.

Keep the allowance and package rounding visible

The allowance increases the estimated liquid quantity after coats and coverage are considered. It is a planning choice for your project, not a guaranteed reserve for every application method. The calculator then rounds up to whole one-gallon cans. You may be able to buy another package combination, but smaller cans or larger pails must be compared using their actual available sizes and the same required total.

Plan colors and products independently

Do not add all walls into one order if different colors or finishes need separate containers. Calculate each product and color group, then round its own purchase quantity. The tool does not estimate drying time, application conditions, prep work, or safe handling. Keep the product label and room measurements with your shopping notes so adjustments can be made without guessing why the original total was chosen.

Worked example

The default room calculation starts with four-wall area, deducts a separately entered opening area, and multiplies by the chosen coats. Coverage converts that area to gallons, and the allowance is applied before whole-can rounding. The ceiling is not included in the example result.

Example inputs — Length: 12 ft; Width: 10 ft; Wall height: 8 ft; Combined door and window area: 40 ft2; Number of coats: 2; Coverage per gallon — check chosen paint: 350 sq ft/US gal; Extra material allowance (planning estimate): 10 %.

Calculated example

Net wall area (sq ft)
312
Paint including allowance (US gal)
1.9611
Whole one-gallon cans to order
2

Frequently asked questions

Does the calculator include the ceiling?

No. The room formula measures walls only. A ceiling is a separate surface, and its paint or coverage may differ from the wall product. Keep its quantity on a separate line.

Should I deduct small openings?

You can enter measured deductions, but inspect the job and decide consistently. Tiny deductions may not change the whole-can count, while a large opening can materially change the estimated painted area.

Is 350 square feet per gallon guaranteed?

No. It is a replaceable planning value. Use the product’s stated coverage under the relevant conditions, and ask the supplier when a rough, porous, or unusual surface makes that value uncertain.

Sources and scope